It’s weird if your new house doesn’t have plumbing. What if it was not connected to the power grid? Consider the time and cost of plumbing or wiring a home that has already been built.

Most people are unaware of the wiring required to build a house. A smart home is no different.

Having a solid foundation for pre-wiring a home automation system that includes security, networking, and AV is critical.

If you’re building a new home, now is the time to set up smart home automation, whether you want it now or later.

Although home automation can be retrofitted for innovative technology after the walls are built, it is best to do this before the walls are installed to save time and money.

The first step is determining what kind of technology you want and when you want it. Are you looking for bright lighting, motorized shades, a security system, outdoor audio/video, or a home theatre? Maybe you want it all!

New house wiring

You can call smart houses, which make life easier for people by providing new facilities, so there are many applicants for them today. Due to this increase in demand, training on implementing these systems and learning how to wire a smart home are among the activities in high demand today.

Does the use of a smart home change the usual home wiring?

Depending on the type of intelligent system used in the building, you can use conventional wiring. In most cases, you can use traditional wiring in PLC-based systems, but in modular systems, the wiring method is different.

Comparison of intelligent and traditional wiring

How smart home wiring is implemented differs from traditional GTA. , I can say that in the conventional mode, to control each consumer, we put a key on the way to feed it. Still, in the intelligent wiring of a house, according to the innovative wiring standard, all consumers are connected to the smart electrical panel and, actually, the output modules (such as relay) feed and control.

Building wiring diagram

The second step is to prepare a map to place pipes and electrical boxes. At first, this work is ready based on the general wiring map of the building, and we specify the switch, socket, lamp, electric pipe, distribution box, and fuse box in this map.

Just as in a traditional wiring system, we need to prepare a map; for the wiring of a smart building, you must do the elemental mapping. A smart building wiring diagram is similar to an old-fashioned building electrical lighting diagram, except that specific related parts, are innovative in a smart home wiring diagram.

To start work, we need three types of maps:

• Drawing the wiring map on the plan: ceiling or floor

• Electrical panel map

• Executive details of sensor installation

In the wiring map of the smart building, drawing the map on the plan and the position of the circuits, which is marked on the ceiling or through the floor, is done based on signals. Also, to implement smart wiring, you need to draw a map of the electrical panel, specify the implementation details of the installation of the sensors and, if necessary, electrical installation drawings.

Pipe and can placement

The implementation of this stage will continue from the time of starting the construction of the wall until before plastering or installing ceramic tiles. At this stage, you should specify the location of the can, pipe and lamp in the building’s wall, ceiling or floor and place them by observing the basic alignment. In this case, you can weld and fasten them easily.

The placement of this tool is critical because if you make a mistake in calculating and placing the pipe and can, correcting them will cost you a lot. After identifying these parts is done, perform plastering or ceramic installation.

Cleaning cans and pipes

Continue the wiring process by cleaning the pipe and can. Usually, due to construction operations, boxes, pipes, switches and sockets are typically filled with construction materials, making the work of wiring more difficult and sometimes impossible. This problem makes the work of the technician difficult.

Therefore, you should clean them in the first step so that you don’t face problems later. You must do it carefully because pouring building materials into the pipe will block and clog them, and as a result, it won’t be easy to pass the wire through the tube.

Smart wiring facilities

The number of people interested in building smart wiring in Toronto is increasing day by day because the facilities that this service provides to people are much more than the traditional system. Some of the facilities are as follows:

• Control of security systems

• Fire alarm system control

• Automatic control of home lighting lines

• Sound and video system control

• Camera control and monitoring

• Facilities available in homes with smart wiring

• Smart fire alarm system

• Theft alarm

• Access control

• Electric curtain

• Sensor for gas, smoke and heat

• Touch panels

• Electric modem

The KCS Group Service

If you plan to build your new smart home in Greater Toronto Area and use its facilities, comfort, and safety, consult the KCS Group. Our experts will help you own a smart home at the lowest cost and shortest time. Contact us today.