Expert Troubleshooting and Diagnostics for Commercial Wiring (E 01)
Commercial wiring troubleshooting is a set of instructions that tries to solve problems and breakdowns in the electricity supply with minor damage to the building and complete security.
What is commercial wiring troubleshooting?
Building electricity is a set of connections distributed throughout the house along with two strands of phase and neutral wires. You can take this power easily and with total security in any home.
In the electrical wiring of the building, you must distribute the 220 V city electricity, which includes a phase wire next to the neutral wire, in such a way that these wirings are not visible. It would be best if you located them in a completely safe space and, at the same time, provided a reasonable level of access.
To meet all these goals, you must have a vast network of connections in every commercial building. Make these connections in the form of interconnected wiring often hidden in walls. Of course, these P connections may suffer failures and problems, which you should do commercial wiring troubleshooting to fix.
Commercial wiring troubleshooting challenges
It would be best to do electrical wiring in any building based on standard rules and principles. For this purpose, you should take a comprehensive look at providing lighting for all the building spaces and, at the same time, provide reasonable and optimal access to control lighting and other electrical appliances.
On the other hand, you should design all these needs keeping in mind the defined and standard safety factors. I recommend getting help from experienced experts of KCS Group who carry out their wiring projects in compliance with standards and safety.
Read more: how to make commercial wiring look professional
Finally, hiding all these connections in the walls will make the commercial building more beautiful.
But the challenges in commercial wiring troubleshooting come from these same rules of thumb when designing. In wiring troubleshooting, we are faced with a network of connections hidden in the walls. It is necessary to find a possible fault among these connections and, finally, to be safe, fix it with the slightest possibility of damage to the house.
In this way, you face several specific aspects of the work in troubleshooting the building’s electricity:
- Understanding the type of defect
- How to get to the fault
- Providing security during work
- Lastly, be careful to have the least amount of damage to the building
A person who is going to work as a commercial wireman must know the wiring in the building and, at the same time, have acquired a high ability to analyze building electrical faults. He should be able to combine this knowledge with the art of finding fault with the least amount of time and damage to the building. This way, you can better analyze the cost of troubleshooting the building’s electricity.
KCS Group uses skilled and trained professionals for commercial wiring troubleshooting, so it completes its projects with minor damage and cost.
Types of commercial wiring troubleshooting
Before you want to troubleshoot the electrical wiring of the building, it is necessary to know the types of faults in the electrical system of the building. Weak electricity and short-circuit can be typical cases in commercial wiring troubleshooting. What these defects are in the building’s electricity and how they will be created can provide you with a better way to fix them. Therefore, I can state the main troubleshooting methods for building electricity in the following order:
- Burning the electric wire
The purpose of wiring in the building is to benefit from electricity safely. Lighting, security and all electrical equipment require electricity. Therefore, this equipment may have a current value beyond the defined limits for any reason.
Currents are called overload, which often occurs with failures in electrical devices. Sometimes due to a lack of knowledge or unjustified mistakes, you may have a significant amount of electrical load on a building distribution line.
It is one of the most common defects in commercial electrical wiring. For example, connect several high-consumption devices to one outlet. In such a case, a current exceeding the tolerance of the cable will pass through it. This current will increase the heat in the thread and eventually lead to the burning of the electric wire.
- Occurrence of a short circuit in the electricity of houses
Short circuits are one of the most common cases in troubleshooting building electricity. In commercial or any wiring, phase and neutral wires should never be connected directly without a standard interface. The reason for the short circuit will be the direct connection of phase and neutral.
Such a state is usually called short-circuit. A short circuit is a dangerous phenomenon and will lead to a fire because it will produce too many currents. In the absence of a standard breaker system, it will cause many failures, such as fire and even severe damage to the wiring of the commercial building.
Many reasons cause electrical connection. From a simple mistake in wiring to the breakdown of electrical equipment in buildings, all of them can be the main reasons for the connection of electricity in homes. But this accident often happens using electrical equipment with long cables outside the walls.
A portable wire or a long cable of a high-use electrical device is quite susceptible to a connection if you ignore their health. Sometimes a short circuit can happen in lighting systems. For example, a burnt light bulb that is left carelessly will cause a connection in the long run.
- Two-phase building electricity
You can check the two-phase of the building’s electricity in two ways and troubleshoot the building’s commercial wiring. First, you must determine whether the building uses three-phase electricity or if this happened to a building with single-phase electricity.
The electricity used in residential buildings is single-phase, but for large commercial and industrial complexes, it is necessary to use three-phase electricity. In these complexes, you have to distribute the load in an equal balance between three phases because using single-phase electricity can never meet the needs of large commercial complexes.
Two-phase building electricity is a disadvantage of three-phase electrical systems. When you lose one of the phases, in such a case, the electricity balance in the building’s distribution network is disturbed. It is an event that can be dangerous.
You may have this question that the two-phase electricity of the building will eventually lead to a blackout in some parts of the building? How can a simple blackout be so dangerous that it is considered a serious threat to large buildings?
In the second part of the commercial wiring troubleshooting article from KCS Group, I will answer your question and explain this problem more. Stay with us.