All services

Electrical Services for Plants, Buildings and Clinics

Every KCS Group service on a single page, sorted by program and described in one line. Every job runs under ESA/ECRA licence #7014042, in the GTA or elsewhere in the province.

Request a callback (647) 979-0549

ESA/ECRA #7014042
COR certified
Level II thermographers
Insured and WSIB covered

Request a callback

A licensed electrical contractor calls you back, usually the same business day.

ESA/ECRA Licence #7014042Licensed low-voltage electrical contractor

COR certifiedIHSA Certificate of Recognition

ISNetworld, Avetta, ComplyWorksPrequalified for industrial clients

Level II thermographersCertified infrared inspections

NETA accreditedANSI/NETA MTS, ATS and ECS

Insured and WSIB covered15 years serving Ontario

Updated November 13, 2026Reviewed by KCS Group licensed electricians

Maintenance and Testing Programs

These programs keep a whole electrical system documented and serviced on a planned schedule. Testing within them follows ANSI/NETA MTS on operating equipment and ANSI/NETA ATS on newly installed gear, while CSA Z463 and NFPA 70B shape the program itself.

Electrical Preventive Maintenance: a planned cycle of servicing for the whole electrical system, built on CSA Z463.
Electrical Inspection Services: visual and operational inspections and safety audits of plant and building electrical systems.
Electrical Testing Services: insulation resistance, contact resistance, trip and ratio testing with recorded, trendable values.
Predictive Electrical Maintenance: condition monitoring that times repairs to the actual state of the equipment.
Electrical Asset Management: equipment registers and condition assessments that rank repair and replacement.
Electrical Troubleshooting: fault finding for nuisance trips, overheating, failed equipment and intermittent problems.
Arc Flash Study: incident energy analysis and CSA Z462 equipment labels.

Industrial and Commercial Site Services

These pages describe how we work in production plants and commercial buildings.

Industrial Electrical Services: maintenance, repairs and upgrades for production facilities.
Factory Electrical Maintenance: plant maintenance scheduled around shifts, changeovers and shutdowns.
Commercial Electrical Maintenance: building electrical upkeep for landlords and property managers.

Equipment Services

Each piece of distribution equipment has its own inspection and test routine.

Switchgear Maintenance: servicing and tests for switchgear lineups, from bus to breakers.
Transformer Testing: inspection and electrical tests on dry-type distribution transformers.
Circuit Breaker Testing: checks that each breaker opens when it should, from panelboard breakers up to the large frames in a main switchgear lineup.
MCC Maintenance: motor control centre bucket, bus and starter inspection and testing.
Electrical Panel Inspection: panelboard, switchboard and disconnect switch inspection and maintenance.
Motor Electrical Testing: readings that reveal weakening motor insulation ahead of a breakdown.
Distribution System Inspection: feeders, bus duct and distribution equipment checked end to end.

Infrared Electrical Thermography Services

Thermal surveys are done on equipment that is running and carrying load.

Infrared Electrical Thermography: thermal imaging of panels, switchgear and MCCs to find hot spots.
Insurance Infrared Scan Reports: scan reports prepared for insurers and risk engineers.
Industrial Plant Thermography: thermographic surveys of plant distribution and process equipment.
Commercial Building Thermography: electrical scans for office, retail and multi-tenant buildings.
Infrared Window Installation: IR viewing windows that allow scans without opening covers.

Medical Clinic Electrical Services

Clinic installations follow the health care rules of the OESC.

Medical Clinic Electrical Contractor: electrical services for clinics and medical office buildings.
Medical Clinic Fit-Out and Renovation: rough-in, wiring and upgrades for new and renovated clinics.
Exam Rooms and Medical Equipment Power: circuits, lighting and receptacles for exam and treatment rooms.

Dental Office Electrical Services

Practices also get help with the forms needed to register an X-ray unit.

Dental Office Electrician: electrical services for dental offices and dental clinics.
Dental Office Fit-Out and Renovation: rough-in, wiring and panel upgrades for new and renovated practices.
Dental Equipment Electrical Installation: dedicated circuits for chairs, compressors, vacuum, X-ray and sterilizers.

Find Services by Industry or City

If you would rather start from your sector or location, these pages bring the relevant services together.

Industries We Serve: manufacturing, warehousing, food and beverage, property management and healthcare.
Service Areas: Toronto, the GTA and Ontario communities, with a page for each city.

Unsure which page fits? Send a callback request and we will suggest where to begin.

Questions

Questions about our services

Choosing a service

What role does an electrical contractor play on a commercial or industrial site?

A licensed electrical contractor maintains, tests, repairs and installs the electrical system, and files ESA notifications for that work. On commercial and industrial sites the role also includes planning maintenance around operations, documenting equipment condition, and helping the owner meet insurer, audit and safety requirements.

Which KCS service should we start with if we have no maintenance records?

Start with a baseline: an equipment survey and condition assessment, usually paired with an infrared electrical scan of energized equipment. That shows what you have, what condition it is in and what is critical. From there we can set a preventive maintenance program and test schedule that fits your budget cycle.

What is the difference between preventive, predictive and corrective electrical maintenance?

Think of it as calendar, evidence and repair. Calendar-driven work happens at fixed dates. Evidence-driven work waits for scan results or test trends to show it is due. Repair work responds to a fault or failure. A sound program blends all three and lets the evidence move the calendar.

Can we book an infrared scan without signing a maintenance contract?

Yes. Many clients start with a single infrared electrical scan, often because an insurer has asked for one. The report ranks findings by severity, and you can choose whether KCS completes the repairs. A maintenance contract is optional and adds scheduled visits and emergency response.

Programs

How does KCS decide how often each piece of equipment is serviced?

We use the equipment condition assessment approach in NFPA 70B: physical condition, criticality and operating environment are rated, and the worst rating sets the interval. Manufacturer instructions and your insurer's requirements are also taken into account, and intervals are reviewed as test and scan results come in.

Can one KCS contract cover several buildings or sites?

Yes. Property managers and multi-site manufacturers often place several locations under one program, with a shared schedule, consistent reports and a single point of contact. Visits are planned by site so each building's shutdown windows and tenant hours are respected.

Do inspection and testing services include the repairs that follow?

Repairs are quoted separately so you can approve them, but they are carried out by the same licensed KCS team that found the problem. After the repair, we re-scan or re-test the equipment and update the report, so the record shows the issue is closed.

Do you offer the same services to clinics as to industrial plants?

Clinics have their own set of services: fit-outs, renovations, exam room and dental equipment power, and help with X-ray paperwork. Maintenance, testing and infrared scans are also available for medical office buildings. The industrial equipment services, such as MCC and switchgear testing, apply mainly to plants and larger buildings.

Related services